Item | 5000 Series 5052 30mm Extruded Aluminum Tube |
Material | 5454,5154A,5754, 5056,5356,5456,5082,5182,5086,etc |
Temper | T4,T5,T6,H24,T8,O.etc |
Surface treatment | Mill Finish, Anodized, Electrophoresis, Wooden Finish, etc |
Colour | Silver, Black, Red, Blue, or as required |
Length | ≤6m |
Shape | Round, Square, T-slot, or as per the drawings and samples |
Fabrication | cutting, drilling, punching, bending, etc |
Wall thickness | ≥0.5mm |
Package | inner plastic paper interleaving each piece profile, outer fixed by plywood, or as per your requirements |
Application | 5052 aluminum tube for the AL-Mg system is the most widely used a rust-proof aluminum, this alloy of high strength, especially with anti-fatigue strength: plasticity and corrosion resistance, can not heat treatment, When the plastic is still good, cold hardening when the plastic low, good corrosion resistance, good weldability, cutting performance can be poor, can be polished. |
Chemical Composition | |||||||||||
Grade | Si | Fe | Cu | Mn | Mg | Cr | Ni | Zn | Ti | Zr | Al |
5052 | 0.25 | 0.4 | 0.1 | 0.1 | 2.2-2.8 | 0.15-0.35 | — | 0.1 | — | — | Balance |
Mechanical Properties | ||||
Grade | Temper | Wall Thickness(mm) | Tensile Strength(Mpa) | Yield strength(Mpa) |
5052 | O | All | 170-240 | ≥70 |