6061-T6511 Rectangle Flat Bar
BRIEF OVERIVEW
6061-T6511 Rectangle Flat Bar, is an extruded solid aluminum rectangle bars that is easy to work with and has a wide range of applications. Aluminum Flats are widely used for all types of fabrication projects where lightweight and corrosion resistance is a concern.
CHARACTERISTICS:
1.Chemical Composition
Grade | Si | Fe | Cu | Mn | Mg | Cr | Ni | Zn | Ti | Zr | Al |
6061 | 0.4-0.8 | 0.7 | 0.15-0.4 | 0.15 | 0.8-1.2 | 0.04-0.35 | — | 0.25 | 0.15 | — | Balance |
2.Mechanical Properties
Grade | Temper | Diameter(mm) | Tensile Strength(Mpa) | Yield strength(Mpa) | Elongation(%) |
6061 | T6 | ≤150 | ≥260 | ≥240 | ≥9 |
T4 | ≥180 | ≥110 | ≥14 |
3.Available Length
2ft, 4ft, 6ft, 12ft or Custom Cut
Standard Length Tolerance = /- 1/4"
Custom Cut Tolerance = /- 1/16"
DISPLAY OF 6061-T6511 RECTANGLE FLAT BAR
OUR SERVICE
There are hundreds of sizes of aluminum flats that you can purchase online to prepare for transport pre-cut or mill lengths, or you can order small or high-volume custom prodsucts at a bulk price. Custom sizes can also be cut or sawed from the clipboard. Cutting into flat material from sheet material does not apply extrusion tolerances.
If you are interested in anyone of them, please without hesitation to contact us
Our email is gugeSigni@ksxinan.com