Item | 2011-T3 Cold Drawn Aluminum Round Rod |
Standard | GB/T3191-1998,ASTM& B221M-05A,JIS& H4040-2006,etc |
Diameter | 2-800mm |
Length | 2m,3m,5.8m,6m,or& as& required |
Temper | O,H14,H12,H16,H18,H22,H112,T5,T6,T651,T351,T42,T451,T62,T3,T81,etc |
Surface | Mill& finish, polished, anodizing, etc |
Package& | Standard& export& package& ,or& as& required |
Application& | 2011 aluminum alloy, US deformation aluminum and aluminum alloy. 2011 alloy element is copper, is a trace of lead and bismuth easy cutting alloy, with high strength and good cutting performance, but the corrosion resistance is poor, common for the bars, tube and wires. 2011 aluminum alloy for the manufacture of screws and require good cutting performance of the mechanical processing prodsucts. |
Chemical Composition | |||||||||||
Grade | Si | Fe | Cu | Mn | Mg | Cr | Ni | Zn | Ti | Zr | Al |
2011 | 0.40 | 0.7 | 5.0-6.0 | — | — | — | — | 0.3 | — | — | Balance |
Mechanical Properties | |||||
Grade | Temper | Diameter(mm) | Tensile Strength(Mpa) | Yield strength(Mpa) | Elongation(%) |
2011 | T1、T4 | ≤150.00 | ≥370 | ≥215 | ≥12 |